HOT BILLET SAW
Features Total absence of cuting surface deformations thanks to the constructive precision of the machine and the use of the blade Scrap inevitably produced by the cutting blade, which is extremely reduced in any case - loss of aluminium less than 5% Impr
Description
Features
- Total absence of cuting surface deformations thanks to the constructive precision of the machine and the use of the blade
- Scrap inevitably produced by the cutting blade, which is extremely reduced in any case - loss of aluminium less than 5%
- Improvement of extrusion quality - reduction of micro-porosity due to the absence of entrapped air in the container
- Recovery of chip through a briguetting system.
- Adaptability to different log diameters.
Tehcncial data
| Parameter | Value | Unit |
| Billet diameter | 254 | mm |
| Min Billet length | 400 | mm |
| Max Billet length | 1200 | mm |
| Admitted length cut cycle to avoid scrap | ~760 | mm |
| Sheared billet length precision | ± 1 | mm |
| Cycle time (without double cut) | 40 | s |
| Cycle time (with double cut) | 60 | s |
